首页 > 装修灵感 > 色彩搭配 > Makeover Your Front Door for a Powerful First Impression

Makeover Your Front Door for a Powerful First Impression

Makeover Your Front Door for a Powerful First Impression

前门可 以加深客人的第一印象

front door makeover



一个强 有力的第一印象

Your front door is more than the entrance to your home. It is a crucial design element in curb appeal and a great place to add a splash of color. Renewing your front door with fresh paint is a great weekend project. Here are the steps on how to do it right.

大门不 仅仅是你家的门口。这是为 自己的家增添吸引力的至关重要的设计元素,也是一 个增加瞩目的色彩的好地方。用最新 款油漆来翻新自己的大门是一个伟大的周末项目。下面的 步骤教你如何正确的施工。

One of the biggest challenges in painting your front door is scheduling the time for the project. During the project you are preparing the door, painting, and applying in between coats, all while your entry will be open. Ideally, you would take the door you are painting down, and place a temporary door in its place. Most of us don’t have a spare door laying around we could use. Because of this, we recommend using a latex paint that dries fast to minimize the dry-time between coats and shutting the door.

粉刷大 门的最大挑战之一就是为项目安排时间。在项目期间,你要为大门做好粉刷,遮盖等准备工作,这段时 间里你的大门口都处于打开状态。理想的情况是,你可以 把你正在油漆的那扇门拆掉,然后在 它的位置放一扇临时的门。但我们 大多数人都没有多余的门可以使用。正因为如此,我们建 议使用快速易干的乳胶漆,以尽量 减少的干燥时间。

painting your previously painted door


Remove the Door or Paint in Place?

把门移 开粉刷还是原地粉刷好?

First, you have to decide whether you want to remove the door from its hinges or paint it in place. This is personal choice on how you want to work. Some people will find it much easier to remove the door and place it on saw horses, but these steps will also work well if you decide to leave it in place.

首先,你必须 先决定你是想要把门拆下来粉刷还是原地粉刷。这是你个人选择,视乎你想怎样施工。有些人会发现,把门拆 掉并把它放在木架上要更容易。但若您 决定将原地施工,那么下 面步骤也会很有效。

Prepare the Door


Start by removing the door handle, lock, and deadbolt assemblies. You can also protect these with masking tape, but it is much easier to get a nice finish not worrying about going around these. Thoroughly clean the door to remove all the dirt, dust, and hand oils that collect over time. To get the smoothest finish possible will require some elbow grease. Carefully sand the entire door surface starting with 120 grit sandpaper and finishing with 220 grit sandpaper to remove all the dings, dents, and rough spots. Make sure you clean off any of the dust from your door before you begin to paint.

先从拆卸门把手、锁和螺栓组件开始。您也可 以使用胶带保护这些设备,但如果 不用担心这些东西的话,你就更 容易获得漂亮的色泽。要彻底 的清洁整扇大门,清除所 有长时间积聚的污物,灰尘和手渍油渍。要想得 到平滑的表面可能需要一些费力的工作。先用120目砂纸 小心地打磨整个门面,然后再用220砂纸磨光,以去除所有的纹路、凹痕和粗糙的斑点。在开始粉刷之前,一定要 把大门上的灰尘清除干净。

Protect parts of the door you don’t want to paint with masking tape and masking paper. Also protect the floor if you are painting the door in place with drop clothes or plastic.

使用遮 蔽胶带保护您不想粉刷的大门部分。如果你 是在原地粉刷大门,那么还 要用废旧衣服或者塑料来保护好地板。

tarting to Paint开始粉刷

No matter what, we recommend applying a primer first. It minimizes problems, and our Diamond Prime Universal Primer is a great choice. It promotes adhesion on tough to stick to surfaces, minimizing the potential for peelin. It also has stain blocking pigments that help block imperfections from reappearing in your finish coat. For flat doors, applying the primer by a roller cover is a great way to ensure a smooth finish. A great choice is one of the microfiber or foam roller covers. If you have a paneled door, a combination of a brush and roller cover is the best choice (see below for more information on how to paint a panel door).

无论如何,我们都建议先涂底漆。它能把问题最小化,我们的Diamond Prime Universal Primer(底漆)是一个不错的选择。它可以 促进坚韧的表面粘附,最大限 度地减少剥落风险。它还具有防污颜料,可帮助 阻止缺陷重新出现在面漆上。对于表面平整的大门,通过滚 筒涂抹底漆是确保表面平滑的好方法。最好的 选择之一是用超细纤维或泡沫进行辊涂。如果你家的是镶板门,则刷子 和滚筒盖的组合是最好的选择(更多关 于如何粉刷镶板门的信息,请参阅下文)。 

After giving the primer enough time to dry, you can move on to applying the finish. In most cases, Diamond Prime Universal Primer can be coated in 2 hours, but it depends on temperature and humidity.

给底漆 足够的时间烘干后,你可以继续涂漆。在大多数情况下,Diamond Prime Universal Primer(底漆)可以在2小时内涂上,但它取 决于当时的温度和湿度。 

For the finish, SureFlo Acrylic Latex Enamel is an outstanding choice and is available in a satin or gloss sheen. It has incredible flow and leveling, making it extremely forgiving in creating a smooth, even surface. Anti-sag properties also make it much easier to apply, especially on paneled doors. SureFlo can be recoated in 4 hours, allowing you to apply many coats in a day. In most situations it dries to the touch in as little as 30 minutes. We recommend allowing the paint to dry as long as possible before closing the door to minimize the chance of it sticking to the frame. SureFlo does have built-in block resistance reducing the likelihood of it sticking to other painted surfaces, but it takes at least 24 hours for the block resistance to fully develop.

对光泽度来讲,SureFlo Acrylic Latex Enamel是一个杰出的选择,它有丝 光和亮光两种光泽。它具有 令人难以置信的流动性和流平性,使其非 常容易形成光滑,均匀的表面。防凹陷 特性也使它更容易应用,特别是在镶板门上。 SureFlo可以在4小时内重新涂覆,使您可 以在一天内涂上许多层。在大多数情况下,只需30分钟即可干燥。我们建 议在关闭门前尽可能长时间地将油漆干燥,以尽量 减少灰尘粘在边框上的机会。SureFlo确实具 有内置的阻挡阻力,减少了 粘附到其他涂漆表面的可能性,但它至少需要24小时才 能完全表现出来。

Remember, paint dries faster in higher temperature, lower humidity, or when exposed to direct sunlight. Avoid painting in these conditions when possible.

记住,油漆在较高温度,较低湿 度或直射阳光下干燥速度较快。尽可能 避免在这些情况下进行涂刷

painting paneled doors粉刷镶板门

Painting paneled doors can be challenging unless you start with a plan. Begin by using a brush to paint the recessed areas of the panels. Then, using either a brush or a roller, paint the faces of the panels, followed by the rails and stiles of the door. Try to minimize painting into partially dried paint film to reduce unsightly brush or roller marks.

除非你 从一开始就计划,否则粉 刷一扇镶板门可能会很有挑战性。首先用 刷子涂刷镶板门的凹陷区。然后,使用刷子或滚筒,涂抹镶板门的表面,然后涂 上门的栏杆和两侧栅栏。尽量减 少粉刷漆膜已干的部分,进行喷涂,以减少 不美观的刷痕或滚痕



上一篇:How to clean and stain your deck丨如何 维护你家的装饰木板?
下一篇:Small plates Food?小食中的美“色”搭配?

友情链接:    必胜彩票   高频彩票   高频彩票   合一彩票首页   v8棋牌